Skip to content
View in the app

A better way to browse. Learn more.
Builtsense

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Technical articles

A group blog by Structural Community in Civil and Structural Engineering

  • Entries

    36

  • Comments

    0

  • Views

    32,501

Contributors to this blog

About this blog

Use this category to post articles, tips and tricks you've learned. Any topic covering civil & structural engineering is acceptable.

Entries in this blog

Environmental engineering

Activated sludge process (ASP) - biological treatment for wastewater

What is activated sludge? It is a FLOC (i.e. body of micro-organisms gathered in a crowd) produced in a raw or settled sewage by the growth of bacteria and other organisms in the presence of dissolved oxygen and accumulated in sufficient concentrations by returning floc previously formed. Activated sludge process Activated Sludge Process is the biological method for treatment of wastewater. It was devised by Arden and Lockett in 1914. In this process a mixture of sewage and activated sludge is a
Environmental engineering

Live and backfill load on buried sewer pipes

Sewer design requires prior knowledge of soil and site conditions to determine overburden loads that will be placed on buried pipes. Total Load = Backfill Load + Live Load Backfill load (W): It depends upon following factors: Trench Width (B) Depth of Burial i.e., depth of fill above pipe (H) Unit Weight of Fill Material (w) Frictional Characteristics of Backfill Live load: Live Loads on the Surface rarely influence design of sanitary sewer because of their Great Depth and Small Size. Backfi
Environmental engineering

General specifications of pipes being used in water distribution system

The following points should be kept in mind while selecting pipe for a certain water supply system, Carrying capacity. Durability. Fire cost. Maintenance cost. Type of water to be conveyed. 1. Cast iron pipes (C.I) Most widely used for the city water supplies. Average life is 100 years. Corrosion my reduce its capacity by 70%. Must be lined with cement or bitumen. C = 130 for new pipe. C = 100 for old pipe (Selected for Design). "C" is the Hazen Williams Coefficient known as HWC. It i
Environmental engineering

Types of sewers and sewer systems

Types of sewers 1. Sanitary sewer It carries sanitary sewage i.e. wastewater from municipality including domestic and industrial wastewater. 2. Storm sewer It carries storm sewage including surface runoff and street wash. 3. Combined sewer It carries domestic, industrial and storm sewage. 4. House sewer It is the sewer conveying sewage from plumbing system of a building to common/municipal sewer. 5. Lateral sewer This sewer carries discharge from house sewers. 6. Submain sewer This sewer receive

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.